Fence Estimate Calculator
Get fence pricing in minutes. Homeowners can see what a fence should cost before getting quotes. Contractors can price the job, check their margin and send a PDF estimate.
Estimate
Enter the feet for a section to see a price.
Using sample Texas pricing.
Your estimate stays on this device. Convert to a printable PDF estimate below.
Fence Prices Per Foot in Texas
Sample installed prices from a working Texas fence company. Your price depends on your yard, materials and local costs.
- 6 ft cedar privacy$29/ft
- 6 ft pine privacy$26/ft
- Chain link, 4 ft$25/ft
- Chain link, 6 ft$31/ft
- Chain link, 8 ft$39/ft
- Wrought iron, 4 ft$45/ft
- Wrought iron, 6 ft$55/ft
- Wrought iron, 8 ft$68/ft
- Ranch style, 3-rail$18/ft
- Ranch style, 4-rail$22/ft
- Field fence$14/ft
- Walk gatesfrom $300
- Double gatesfrom $600
- Tear-out$3.50/ft ($350 minimum)
Prices vary outside Texas because material costs, labor rates and local codes differ.
How to Get a Fence Quote
- 1
Measure each side of the yard
Walk the line you want fenced and note the length of each straight run in feet.
- 2
Enter the sections and gates
Add each run and any gates in the calculator above to get a ballpark price.
- 3
Compare your quotes
Ask local fence companies for quotes, then hold them up against your number.
How to Use It for Your Fence Business
- 1
Switch to contractor mode
Use the button above the calculator to unlock settings, saved estimates and the PDF.
- 2
Set your prices in Settings
Replace the sample prices with your own rates, labor and materials percentages.
- 3
Add sections and gates
Enter each run of fence and each gate. Cost, profit and margin update as you type.
- 4
Download the PDF or save the estimate
Send the customer a clean PDF, or save it on this device to open later.
How the Pricing Works
The sample prices are based on Texas jobs. Fence prices vary by location because material costs, labor rates and local codes differ, so set your own prices in Settings before you send an estimate.
Fence $ per foot
This is what the customer pays for each foot of fence, installed. Chain link and wrought iron have a rate for each height. Ranch style has a rate for 3-rail and 4-rail. Section price is the feet times this rate.
Barbed wire and wire
Barbed wire on chain link and wire on ranch fence are added to the per-foot rate for that section.
Tear-out
Removing an old fence is charged per foot. If the total comes out below the tear-out minimum, the minimum is charged instead. When several sections are checked, the highest minimum applies.
Rot board
Privacy fences can get a rot board along the bottom. The customer pays a per-foot charge. Your cost counts the boards you need, based on board length, plus a dollar of labor per foot.
Gates
A walk gate or double gate is priced from the settings of its own fence type. The opening width shows on the estimate but does not change the price. Each double gate also adds the cost of a drop rod to your materials. Custom gates use the price you type.
Labor $ per foot
Your crew cost for each foot of fence. It feeds your total cost and never shows in Customer View or on the PDF.
Materials % of sale
A share of each section's sale price that goes to materials. It is applied to fence sections and gates to estimate your material cost.
Profit and margin
Total cost is labor plus materials. Profit is the customer total minus total cost. Margin is profit divided by the customer total, shown as a percent.
